SAN-AIR Mould Remover
Cleaning mould should be easy and SAN-AIR Surface Mould Remover makes sure that removing any visible mould you have and ensuring that it stays gone is a simple matter.
Features
Immediately visible mould removal
Long-lasting
Scientifically tested
Environmentally friendly and Exceptionally safe to use
Ready to use, easy to apply
SAN-AIR has been independently tested and confirmed to remove 99.99% of Surface mould and Bacteria.
SAN-AIR protects the cleaned surface for up to 12 months. Keeping you and your family safe from any mould or bacteria contamination.
Note: The surface mould remover does not come with a trigger spray nozzle.
Clean Mould Yourself – Safely
SAN-AIRtm Surface Mould Remover thoroughly cleans any surface of mould without any toxic chemicals. Simply spray onto any surface leave 15 minutes then wipe away.
Easy to use
100% safe for people, pets, property
No toxic chemicals
Biodegradable
Sustainable
Fast-acting
Safe for use on air conditioners including grilles and outlets
Neutralise toxic mould and mildew
Neutralise bacteria
Removes the root of the mould
Remove odours
Reduce your mould cleaning frequency
Reduce your environmental impact
100% natural active ingredients
This product uses 100% natural Australian essential oils . This means that, unlike other cleaning products, it will not cause damage to your property when applied. It will safely remove the mould so that you can be stress-free.
Instructions
SET UP
Adjust the nozzle to a fine spray, test the surface you want to clean by spraying a small area first. (Note it is normal to see the surface lighter in colour while wet).
CLEAN
Spray to coat mould evenly, wait 15 minutes and wipe the mould off with a clean dry cloth.
Ensure that dirty cloths are not reused as you will spread the mould. Instead, for each wipe, use a clean area of the cloth until the cloth is used up, then continue cleaning with a new clean cloth.
Repeat step 2 until all mould has been removed.
FINISH
Use a final spray with a fine mist and allow to air dry, leaving a fine mould prevention coating.
Follow the instruction on the label to get maximum results.
Product details
Coverage: 500ml coverage is approx. 10m2
Shelf Life: 2 years if left unopened and stored at 19-30 degrees C.
Don’t risk damaging you or your property with chemical mould removers.
Get the PROFESSIONALS CHOICE .
SAN-AIR MOULD GONE GEL
Prevent toxic mould existing in your home
SAN-AIRtm is the only toxic mould control and prevention product that uses 100% natural sustainable ingredients.
SAN-AIRtm prevents the mould from growing in your home. It attacks the mould before it has a chance to take hold.
If you already have a mould problem SAN-AIRtm Mould Gone Bio-Clean Gel will attack the mould and make it easy for you to clean away. Once the mould is cleaned away SAN-AIRtm Mould Gone
Bio-Clean Gel will continue to maintain the health of your home so that you get full protection and prevention from toxic mould 24/7.
Features
Prevents mould from growing in your home, office, car or any indoor space.
Cleans the air that you breathe.
Safe to use around children, pregnant women, babies and pets.
Made with 100% natural and organically derived ingredients.
100% biodegradable.
Targets mould and bacteria.
If you find you are using a lot of damp removing products and still getting mould, then it’s time to use SAN-AIRtm
SAN-AIRtm products will remove mould and bacteria in your indoor air space ensuring that you breathe clean air.
Where do you place it?
Place in a room with the windows closed for the first 48-72 hours. The gel will evaporate into the air coming into contact with airborne mould and bacteria.
In your home, you can place it on any surface. For example – hallway tables, window sills, desk, bathroom shelf, wardrobe, next to kitchen bin, inside air-conditioning return(ducted system) or on top of a split system.
In your office, similarly, it can be placed on your desk, shelves, kitchen area, toilets, on top of split systems or inside the air-conditioning return (ducted systems).
No more worrying about:
Musty smells
Mould
Stale air
Product details
Gel
Lifetime: 4 – 6 weeks once opened. 2 years if left unopened.
Weight: 75 grams
Indoor Coverage:
1 jar per household room
If you have access to your premise’s home air-conditioning system return air vent. You can place the jar on top of the grating and this will spread the product more thoroughly throughout your home/office.
Spray
Coverage: 500ml coverage is approx. 10m2
Shelf Life: 2 years if left unopened and stored at 19-30 degrees C.
Bundle includes
2 x 500ml bottle (may come as single 1L)
2 x 75g gel
1 x Air Diffuser / Gel Dispenser